Has anybody suffered a knocking from the front and of the car that is quite daunting, especially when I drop off the edge of a sleeping policeman whilst...
I sometimes get this on my works speed bumps but then again they do have snow on the top of them. You have lowered yours. At i guess i`d say you could be...
Suspension is fine and travel has been checked, besides, I'm talking about travelling over speed bumps at 5-10 mph here. I'm in for the Sound quality not the...
Just something i found which you guys might find funny. Haynes: Rotate anticlockwise. Translation: Clamp with molegrips then beat repeatedly with hammer...
Darren, Very likely the bushings for the front anti-roll bar (stabiliser bar across the pond). I have a similar noise from the back. Probably needs new...
Have you tried on www.mx-3.com as there is a online manual on there which could have a drawing. I`m definitely going to Japfest now so will have to come and...
Find me in the IASCA sound off area, I'll try the site ... which could have a drawing. ... your car. ... (stabiliser ... Probably ... similar. ... hitting ......
I am looking for a replacement back box for my 92 V6, can anyone recommend a decent one, prefereably something that sounds nice , but not so loud as to annoy...
I`ve got one from Jetex it`s a bit loader but not excesive. It has twin 89mm round tips. It was a mind you cost about £250. Ian J ... [Non-text portions of...
Just been trying to reduce the file size of my Bolney pics. Can only reduce a Supra pic at the mo. Can someone else check if the can see it ok. It`s in the...
I didn't think you had to reduce the size of the piccies! I've never done that, but nice Supra all the same! ... only reduce a Supra pic at the mo. Can someone...
Looking forward to the Jap-Fest; not looking forward to the drive though! Got my admission ticket so tomorrow night I'll be booting on down to Swindon's...
I`ll see ya there at some point. I`m driving down Sat morning and staying a little B and B nearby on the Sat night with the girlfriend. Well I had to bribe...
Just added a few pics from the big Jap car meet at Bolney. There are a couplefrom a service station where I met up with some mx-6 owners and a couple of my...
What a drive! Eight and a half hours there and four and a half back (no traffic yer onner.......honest!) Got a staggering 38 mpg out of one stint and a...
Yea it was a good day. Got chatting to the guys on the mx-6 stand the same ones i met at Bolney and the said i could have got my cay on there stand this was at...
Hi all, Just added a couple more photos. There are 2 of my mx in folder Ian J and a couple of Darren`s at Japfest. They are in his big boolers folder. When i...
Yes, i'll be up for a midlands meet. Let me know if i can help with the organisation in any way. Just had a look at your pics - she looks very clean and looked...
Thats because it`s on the other side!! After all i had to get it1s best side!!! Not sure how i would upload the sound. ... [Non-text portions of this message...
Went for a blast tonight and found that that knocking I was complaining about became even more apparent and more frequent when loading the front end on right...
Darren, I'm not the world's expert on this sort of thing, but I would have expected a wheel bearing to be more or less continuous, not just in extreme corners....
Could it be a CV joint?????? Try going into a empty flat car park and put the car on full lock and see if it makes a noise. You could also try jacking the car...
How about a run wot ya brung day one sunday at Santa Pod. This is probally too far for most people I`d guess. C ya Ian J [Non-text portions of this message...
As there would`nt be many of us for a meet up I mentioned it on a mx6 message board about the possibility of a joint meet up. They seem up for it. cheeck out...
Yet another win for the MX this weekend. Mind you a big panic whilst travelling on friday down to santa pod, my monoblock died and left me with no bass. Got a...
