You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hi all, What bulbs do people use as mine seem very dull. Or is this common with the mx-3???????? Cheers Ian J [Non-text portions of this message have been...
Are your lenses milky? I mean on the MX! I spent some time polishing mine and there are bright, mind you they are no Xenons ... common with the mx-3????????...
Sorry for the delay, just started my own business and time is as precious as pigeons teeth. I used lots of elbow grease and Autoglym resin (the red one) as it...
Had a couple of minutes to spare to tell you all that I'll be competing in the IASCAUK sound offs this year so if there are people who live in the areas of the...
The link does`nt work. I`ll try and get along if not too far away from me. I`ve always fancied dropping 40mm and bigger wheels but money is tight and i might...
Found the right link now. http://www.iascauk.com/events.htm I was hopping to goto Donny anyway so will try and make sure I`m there now. ... From: Darren Leck ...
15" alloys and tyres for mx-3 going cheap (not a budgie) one tyre shot, one michelin and two 6 month old nankangs. probably worth £60 for just the tyres as...
I've had a quick scour of the past posts to find out of anybody here has put an induction kit on their MX, but to no avail. Has anybody looked into this and...
Hiya mate, I`ve got the prm intake from www.corksport.com there in the US, It gives a pretty good roar. I would love to see your pics when you get the wheels...
Hi all, very quiet in here these days! Ok, my dilema is as follows, My 1991 V6 with 109000 on the clock needs a new driveshaft and in the near future a head...
Don't use a a main dealer!! I had a dive shaft & new boots fitted for about £200 at my local garage. Cylinder head gasket shouldn't be prohibitive. I...
Downloaded a view of my MX now with the 18" boolers and dropped 40mm Tell me what are your views...............good or bad, not bothered. In addition, I put...
I think it looks good. How much did it cost you for the wheels and to drop it???? 1 idea about your induction kit. Is it a open filter which sucks air from...
Hi Darren, Looks very nice - how does it handle with the lowered suspension? I have long had doubts about those induction kits, but I've never heard of them...
Darren, If you want to try the cold air suggestion, go to the MX-3.com site and search for "home depot" and member no "42" for some ideas. ... to drop it???? ...
The annual JAE motor show will soon be upon us (26/27 July). The show is dedicated to Japanese motors and is held in Northampton. The show relies on people...
I would love to go but not sure as I can. As I might be working away that weekend. Keep me posted if you get any interrest. Ian J ... From: Steve Thomas...
I'll take a look at that site and it's contents to check for the routing of the filter. The wheels and a full set of suspension and a set of lowered springs ...
Given that the original suspension was on it from 12 years ago and it handled like a bath full of water, the whole suspension was renewed and it handles OK. My...
Shame not to have made contact with anyone from this forum at the weekend. Still, I won my 1st place trophy and I've posted a couple of better piccies of the...
Hi Darren, 1st Place -- well done. Re the brake disks - there's not much to play with - 2mm from new to scrap - see page P-034 on the MX-3.com Online Manual....
