You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
I have a part built Dyak with no reversing lever, I have looked through the old MEs but cant find a drawing or dimentions for the reversing lever. does anyone...
Hi Will, LBSC didn't describe one in the Dyak series. Instead he refered builders back to the one for Mary Ann which is in Vol. 70, issue 1719, page 372. If...
I am in the process of converting the Dyak drawings to autocad format at the request of Gerald Chandler and, not having built the engine, am concerned with a...
Hi Alex, As you found out from the Helen Long drawings, a lot of the dimensions on LBSC's drawings do not tally! The problem is that he built by eye rather...
John, I think you are correct in your supposition - Certainly the majority of problems I found with the olympiade drawings stemmed from a dimension being...
My family and I have recently moved to the spectacular Shetland Islands but may have made a small mistake... there appear to be no club tracks up here! If...
Hi Alex, I would certainly make the cylinders horizontal as I am sure this is what was intended but this will mean lowering the exhaust and inlet holes in the...
John, I believe I have a solution to the cylinder centerline issue. In the LBSC drawings the wheels are shown as 5/16" thick plus another 1/16" for the boss....
I am looking for a combination whistle turret with two or three take offs for other accessories. The boiler connection needs to be 1/4" x 40T with the pipe...
Unfortunately I believe the chap who was running Fyne Fort died late last year after a long illness. Most of the suppliers are now either making their own ...
Simon Thomas
spt001@...
Jul 12, 2006 8:17 am
681
Robert Barker does fittings, he does traction engine stuff but would probably make anything? Simon ... From: "Simon Thomas" <spt001@...> To:...
Hello List Members, Some time ago I acquired a bronze frame and a handful of other parts for a Little Engines 2.5" gauge 4-6-2. My original plan was to make...
Hi all, If anyone is interested, Station Road Steam has a quite nice looking Dyak chassis (running on air) with boiler kit, rest of castings etc for sale....
Hi I have just have aquired two sets of frames with wheels cylinders etc I think they are for a speedyette by lbsc and a netta by lbsc.Does any body have any...
Hi I have just aquired two sets of frames complete with wheels,cylinders etc one is for speedyette and for netta both by lbsc,does any one have any drawings...
Hi Bob, Drawings for Speedyette should be available from Reeves if no-one can supply you with some s/h copies. The Association can supply photocopies of the...
Polly Engineering sell just what you are looking for I brought 2 from them last year at one of the shows. they are very well made and save a lot of time. Will....
As the copyright is owned by Nexus for pretty much every design that has appeared in Model Engineer or Mechanics, you should be able to get them from any ...
Simon Thomas
spt001@...
Jul 18, 2006 10:55 am
691
With another family member due in the near future, I need to make a little more space around the house. With that in mind, I am reluctantly offering one of my...
Simon Thomas
spt001@...
Aug 2, 2006 6:42 pm
692
Hi all Can anybody help me?. I have aquired a set of frames for a bulleid pacific in 3 1/2 gauge,does anybody know where i can obtain a set of drawings and...
Hi Bob, The only reference I can find to a 3-1/2" gauge Bulleid is a short series of 3 articles in Model Engineer Volume 134 Numbers 3354 to 3356. The authors...
Hi again Bob, There's another rolling chassis appeared on Ebay complete with all wheels and the cylinders. Might be worth keeping an eye on it. The item number...
Hi all Can anybody help me?. I have aquired a set of frames for a bulleid pacific in 3 1/2 gauge,does anybody know where i can obtain a set of drawings and...
... I have checked the above frames out,they are the same as i have eccept i do not have the cylinders.Thanks anyway. Bob ... This mail sent through...
Hello all, My name is Bill and im currently forced away from my machine shop at the moment as I am taking classes down in Florida for air traffic control. I've...
... Bill, these plans were discussed here before - have a look at: http://uk.groups.yahoo.com/group/halfinchlivesteamforum/message/628 best rgrds Chris...
